if problem persist, replace the cache module. Order to make it available to operating system: setarch x86_64 -uname-2. Re: drive array controller failure (slot 0) Hi nasprok Upgrading the firmware of HP Smart Array P410i controller to 6.60 (or higher) resolve the issue. The RAID controller in fact uses a 'capacitor' for this function. Setarch x86_64 -uname-2.6 /usr/sbin/hpacucli ctrl all show config detailĬommand similar to the following may be used to configure physical HDD in HP D元60 G8 servers used as Avaya Common Servers do not have an actual RAID battery for the RAID controller cache. Setarch x86_64 -uname-2.6 /usr/sbin/hpacucli ctrl all show config Setarch x86_64 -uname-2.6 /usr/sbin/hpacucli ctrl all show status If everything goes well the above command will return something like Smart Array P410i in Slot 0 (Embedded) (sn: 50014380175C3490)Įxamples of using hpacucli command include: setarch x86_64 -uname-2.6 /usr/sbin/hpacucli ctrl all show Utility): # setarch x86_64 -uname-2.6 /usr/sbin/hpacucli ctrl all show Without the following workaround (alternatively one may use Unfortunately it was not possible to use hpacucli utility with Linux-3.2 Obviously we want to use at least Linux kernel 3.2 which has new hpsa
Hp smart array p410i controller failure software#
HP software which is available for Debian from the following address: deb stable/current non-free The latter is available through BIOS menu on boot or using proprietary Hpacucli is used to create, delete and repair the logical and physical drives on the smart array controllers in HP servers. As the name suggests, this utility is for HP servers.
Hp smart array p410i controller failure drivers#
At the hp site I just looked at the Download drivers and software. but anyway it pushed me to look at the RAID controller. Features embedded in Interim Recovery Mode. HP P410i - Parity initialization failure. 13-04-2014 I am trying to set things up a HP. The HP Smart Array P410 controller is limited in IOPS capacity. Just make sure youre good to choose OS as spare. So health monitoring will not be possible.Īnother problem that HDD adding or replacing should be done through HDD HPACUCLI stands for HP Array Configuration Utility CLI. I suggest system board failure, as the Smart Array P410 controller is onboard. The battery on your motherboard is a standard motherboard battery: 3v Lithium CR2450N 5. One of the obvious drawbacks of this is filtering S.M.A.R.T. There’s two batteries inside, one on the motherboard and one that is plugged into the Array Controller (the HP Smart Array 6i 128 MB Battery Backed Write Cache (BBWC)). System only as logical devices after they are configured in controller. The overall impression regarding building storage system on HP ProLiantĪs expected HP Smart Array P410i is not supporting RAID6 and it is not Happened to be possible with some caveats. Server with HP Smart Array P410i controller for small capacity storage.Īlthough we don't recommend to use such hardware for data storage it We've been asked to evaluate the possibility to use HP ProLiant D元80 G7
0 kommentar(er)
